GET YOUR DOWNLOAD IMMEDIATELY
Cart 0
CADILLAC 1949 Series 60S, 61, 62, 75 and 86 Factory Shop Manual | carmanualsdirect

CADILLAC 1949 Series 60S, 61, 62, 75 and 86 Factory Shop Manual

$24.99

CADILLAC 1949 Series 60S, 61, 62, 75 and 86 Official Factory Shop Manual

PDF Download. 

This manual is for the following Cadillac models manufactured in 1949 

  • Cadillac Series 60S
  • Cadillac Series 61
  • Cadillac Series 62
  • Cadillac Series 75
  • Cadillac Series 86

Below is a detailed list of topics covered in the Cadillac Manual

 

  • General Information
  • Lubrication Preventive Maintenance
  • Body
    • Adjustment of Door Check and Hold Open
    • Door Alignment
    • Removal and Installation of Windshield Glass
    • Removal and Installation of Rear Window Glass
    • Removal and Installation of Glove Box
    • Removal and Installation of Outside Door Lock Handle and Escutcheon
    • Removal and Installation of Door Lock
    • Removal and Installation of Door Check and Hold Open
    • Removal and Installation of Door Weather strips
    • Removal and Installation of Door Window Regulator Assembly
    • Removal and Installation of Door Ventilator Regulator Mechanism and Ventilator Assembly
    • Removal and Installation of Deck Lid Lock Assembly
    • Removal and Installation of Deck Lid Weather strip
    • Removal and Installation of Deck Lid and Hinge Assembly
    • Removal and Installation of Headlining
    • Removal and Installation of Windshield Wiper Transmission
    • Flushing, Draining and Refilling the Hydro-Lectric System
    • Removal and Installation of Motor and Hydraulic Pump Assembly
    • Hydro-Lectric System Diagnosis Procedure
    • Checking Operation of Motor Solenoid Switch
    • Checking Operation of Circuit Breaker
    • Checking Operation of Window or Seat Switches
    • Checking Operation of Window Cylinder Solenoids
    • Checking Operation of Seat Adjuster Cylinder Solenoid
    • Checking Folding Top Control Valve Electrical Circuit
    • Testing Fluid Pressure at Pump
    • Testing Fluid Pressure at Top Control Valve
    • Testing Fluid Pressure at Top Lift Cylinders
  • Frame
    • Checking Frame Dimensions
    • Checking Frame for Twist
    • Replacement of Front Cross Member
  • Chassis Suspension
    • Correction of Front Wheel Alignment
    • Adjustment of Rear Stabilizer
    • Removal and Installation of Wheel Shields
    • Wheel Bearing Adjustment
    • Removal and Installation of Front Wheel Hub and Bearings
    • Removal and Installation of Rear Wheel and Brake Drum
    • Removal and Installation of Axle Shaft Flange Bolts
    • Servicing Rear Spring Liners
    • Removal and Installation of Rear Spring
    • Removal and Installation of Steering Knuckle
    • Removal and Installation of Lower Suspension Arms
    • Removal and Installation of Front Stabilizer
    • Removal and Installation of Tie Rod and Steering Connecting Rod
    • Removal and Installation of Idler Arm and Support
  • Rear Axle
    • Replacement of Oil Seals
    • Removal and Installation of Rear Axle Pinion Oil Seal or Yoke
    • Retightening Rear Spring U-Bolts
    • Removal and Installation of Axle Shaft and Bearing
    • Removal and Installation of Differential Carrier
    • Removal and Installation of Universal Joints
    • Commercial Chassis Universal Joint Yokes
  • Brake System
    • Brake Adjustment
    • Hand Brake Adjustment
    • Brake Assemblies - Relining Brakes, Machining Brake Drums, Bleeding Brakes
    • Removal, Disassembly, Assembly and Installation of Master Cylinder
    • Removal Disassembly, Assembly and Installation of Wheel Cylinder
    • Replacement of Stoplight Switch
    • Pedal Alignment
  • Engine 331 V8 Mechanical
    • Torque Tightness
    • Removal of Cylinder Head
    • Disassembly Cylinder Head assembly
    • Reconditioning Valves and Seats
    • Assembly of Cylinder Head
    • Installation of Valve Guides
    • Installation of Valves.
    • Installation of Cylinder Head
    • Noisy Operation of Valve Lifters
    • Checking Valve Lifter Leak-Down Rate
    • Removal of Valve Lifters
    • Disassembly and Assembly of Valve Lifters
    • Installation of Valve Lifters
    • Removal and Installation of Engine Oil Pan
    • Removal, inspection and Installation of Oil Pump
    • Removal of Connecting Rods and Pistons
    • Replacement of Connecting Rod Bearings
    • Replacement of Main Bearings
    • Replacement of Piston Rings
    • Removal and Installation of Piston Pins
    • Measuring Piston Clearance
    • Reconditioning of Cylinder Bores
    • Connecting Rod Alignment, assembly and Installation
    • Connecting Rods and Piston Assembly and Installation
    • Replacement of Rear Main Bearing Oil Seal
    • Removal of Timing- Chain and Sprocket
    • Removal of Camshaft
    • Checking Camshaft
    • Removal of Camshaft Bushings
    • Installation of Camshaft Bushings
    • Installation of Camshaft
    • Installation of Timing Chain and Sprockets
    • Removal and Installation of Crankshaft
    • Removal Inspection and Installation of Flywheel
    • Removal and Installation of Crankshaft Pilot Bearing
    • Engine Support Mountings
    • Removal and Installation of Engine with Transmission
  • Engine Electrical System
    • Engine Tune-Up
    • Cleaning and Setting Spark Plugs
    • Inspection of Distributor Contact Points
    • Disassembly and Assembly of Distributor
    • Setting Timing
    • Belt Adjustment
    • Generator Removal, Disassembly, Test, Assembly and Installation
    • Regulator Tests
    • Cutout Relay Adjustments
    • Voltage Regulator Adjustments
    • Starting Motor Circuit
    • Starter Solenoid Relay
    • Starter Pinion Adjustment
    • Removal, Disassembly Inspection, Assembly and Installation of Starter Motor
  • Engine Fuel System
    • Carburetor Choke Thermostat Settings
    • Carburetor Adjustments - Idle Speed and Mixture Adjustments, Float Level Adjustment, Accelerator Pump Adjustment, Metering Rod, Adjustment, Fast Idle Cam Adjustment, Fast Idle Speed Adjustment, Choke Unloader Adjustment
    • Fuel and Vacuum Pump Tests - Checking Fuel Pump Pressure, Fuel Pump Capacity, Vacuum Pump Output, Pump Valves
    • Cleaning Fuel Lines
    • Removal and Installation of Heat Control Valve
    • Installation of Exhaust Manifolds
    • Removal of .Carburetor from Engine
    • Disassembly Inspection, Assembly and Installation of Carburetor - Upper Carburetor Body, Bowl Cover, Mounting Flange and Body,
    • Removal, Disassembly, Assembly and Installation of Fuel and Vacuum Pump
  • Exhaust System
    • Removal and Installation of Muffler
    • Removal and Installation of Gasoline Tank
  • Cooling System
    • Removal of Radiator Filler Cap
    • Draining and Refilling the Cooling System
    • Radiator Preventive Maintenance
    • Preparation of Cooling System for Anti-Freeze
    • Checking Radiator Cap and Seat
    • Removal, Testing and Installation of Thermostat
    • Flushing Cooling System
    • Vacuum Tests for Radiator Clogging
    • Air and Water Leakage Tests
    • Correction of Air and Water Leakage
    • Radiator Cleaning Procedure
    • Removal, disassembly, inspection and Installation of Radiator
    • Removal, Disassembly. Inspection Assembly and Installation of Water Pump
  • Clutch
    • Clutch Pedal Adjustment
    • Clutch Pedal Alignment
    • Correction of Spinning Clutch
    • Correction of Dragging Clutch
    • Correction of Slipping Clutch
    • Squeak in Clutch Mechanism
    • Removal of Clutch
    • Lubrication of Pilot Bearing
    • Replacement of Clutch facings
    • Disassembly of Pressure Plate
    • Assembly of pressure plate
    • Adjustment of Clutch Release Levers
    • Removal of Locking Pins
    • Installation of Clutch
    • Balancing Clutch
  • Standard Transmission
    • Adjustment of Transmission Shift Linkage
    • Correction of Gear Clash
    • Correction of Slipping Out of Gear
    • Correction of Hard Shifting
    • Removal Disassembly and Installation of Transmission
    • Removal Disassembly assembly and Installation of Shifting Mechanism
  • Hydra-Matic Automatic Drive Transmission
    • Replace Fluid
    • Manual Control Linkage Adjustment
    • Throttle Control Linkage Adjustment
    • External Band Adjustments
    • Front Band Adjustment
    • Rear Band Adjustment
    • Towing Instructions
    • Checking Pump Pressure
    • Seals against Leakage
    • Correction of Leaks at Fluid Coupling
    • Removal and installation of Hydra-Matic Transmission From Car
    • Disassembly and assembly of Transmission
    • Removal Inspection and Installation of Torus Members and Flywheel Housing
    • Removal of Hydraulic Control Units
    • Checking Main shaft End Play
    • Removal of Drive Line Parts
    • Repair of Drive Line Components
    • Disassembly, Inspection and assembly of Front Unit
    • Disassembly, Inspection and assembly of Rear Unit
    • Installation of Front and Rear Units
    • Disassembly, Inspection and assembly of Reverse Unit and Output Shaft Assembly
    • Installation of Reverse Assembly
    • Inspection of Main shaft
    • Repair of Oil Control Unit Components
    • Disassembly, Inspection and assembly of Front Servo
    • Disassembly, Inspection and assembly of Rear Servo
    • Installation of Servos
    • Disassembly, Inspection and assembly of Front Pump
    • Disassembly, Inspection and assembly of Rear Oil Pump and Governor
    • Installation of Front and Rear Pumps
    • Disassembly, Inspection and assembly of Valve Body
    • Installation of Valve Body Assembly
    • Internal Band Adjustment
    • Installation of Side Cover and Oil Pan
    • Hydra Malic Diagnosis
  • Steering System
    • Steering Gear Adjustments
    • Removal and Installation of Steering Gear
    • Disassembly and Assembly of Steering Gear .
    • Removal and Installation of Steering Wheel
  • Chassis Sheet Metal
    • Hood Locking Mechanism
    • Removal and Installation of Hood Panel
    • Removal and Installation of Radiator· Grille Assembly
    • Removal and Installation of Radiator Shroud Assembly
    • Removal and Installation of Left Front Fender
    • Removal and Installation of Right Front Fender
    • Removal and Installation of Left Rear Fender
    • Removal and Installation of Right Rear Fender
  • Electrical System
    • Replacement of Head Lamp Units
    • Parking and Front Signal Lamps
    • Rear Lamps
    • License Plate Lamp
    • Instrument Lamps
    • Map Lights..
    • Operation of Directional Indicators
    • Gasoline Gauge Service
    • Temperature Gauge Service
    • Removal and Installation of Instrument Panel
    • Resetting and Starting Clock
    • Regulation of Clock
    • Removal and Installation Clock
  • Specifications

 

File Format: PDF 

Compatible: All Versions of Windows & Mac 
Language: English 
Requirements: Adobe PDF Reader 

Images used are for promotional purposes only.

Copyright©Car Manuals Direct 2018

Adobe Reader is required to read this file. You can download it free from http://get.adobe.com/reader/


Share this Product


More from this collection