OLDSMOBILE 250 CID In-Line 6 Engine Rebuild Manual

Comes as a PDF download.

Complete shop manual with easy, step by step instructions for the DIY mechanic or professional technician to help maintain or rebuild the 250 CID In-Line 6 Engine.

Below is a detailed list of topics covered in this Oldsmobile Engine Rebuild  Manual: 

• DESCRIPTION
• ENGINE ASSEMBLY 250 L6
• MANIFOLD ASSEMBLY | ROCKER ARM COVER | ROCKER ARM ASSEMBLY | ROCKER ARM STUDS | VALVE LIFTERS | LOCATING NOISY LIFTERS | VALVE STEM OIL SEAL AND/OR VALVE SPRING | CYLINDER HEAD ASSEMBLY | VALVE GUIDE BORES | VALVE SEATS | VALVES | OIL PAN | OIL PUMP | REAR MAIN OIL SEAL | TORSIONAL DAMPER | CRANKCASE FRONT COVER | OIL SEAL (FRONT COVER) | CAMSHAFT | MEASURING LOBE LIFT | OIL NOZZLE REPLACEMENT | CAMSHAFT GEAR REPLACEMENT | CAMSHAFT BEARING | TIMING GEAR REPLACEMENT | MAIN BEARINGS | CONNECTING ROD BEARINGS | CONNECTING ROD AND PISTON | PISTON PINS | PISTON RINGS | CRANKSHAFT | CYLINDER BLOCK | OIL FILTER BY-PASS VALVE | DISTRIBUTOR BEARING | CYLINDER CONDITIONING | CYLINDER BORING | PISTON SELECTION | FLYWHEEL | ENGINE MOUNTS | ENGINE TORQUE TIGHTENING | SPECIFICATIONS | FUEL PUMP | TOOLS
• ENGINE TUNE UP
• ENGINE TUNE-UP | SPARK PLUGS | DISTRIBUTOR CONTACT POINTS | DWELL ANGLE | IGNITION TIMING | SLOW IDLE ADJUSTMENT | ON-CAR ADJUSTMENTS - L-6 | CYLINDER HEAD TORQUE AND VALVE ADJUSTMENT | COMPRESSION TEST | ON-CAR ADJUSTMENTS - V-8 | IGNITION SYSTEM DIAGNOSIS | TUNE-UP CHART | DISTRIBUTOR TEST SPECS
• COOLING
  
• ENGINE COOLING SYSTEM | COOLING SYSTEM - L-6 | FAN | WATER PUMP | THERMOSTAT | THERMOSTATIC VACUUM SWITCH-K-19 | FAN BLADE IDENTIFICATION CHART
• CARBURETION
  
• MODEL BV
• DESCRIPTION | CHOKE | AIR HORN | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | CARBURETOR ASSEMBLY | FLOAT BOWL | THROTTLE BODY | FLOAT BOWL | AIR HORN | FLOAT LEVEL ADJUSTMENT | FLOAT DROP ADJUSTMENT | CHOKE | ADJUSTMENTS (ON OR OFF CAR) | ADJUSTMENT SPECIFICATIONS
• MODEL YF CARBURETOR
• DESCRIPTION | BOWL AND THROTTLE BODY | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | CARBURETOR ASSEMBLY | METERING ROD | AIR HORN | FLOAT ADJUSTMENT | ASSEMBLE AIR HORN TO BOWL | ADJUSTMENTS
• MODEL 2GC CARBURETOR
  
• THEORY OF OPERATION | FLOAT SYSTEM | IDLE SYSTEM | PART THROTTLE SYSTEM | POWER SYSTEM | PUMP SYSTEM | CHOKE SYSTEM | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | CARBURETOR ASSEMBLY | ADJUSTMENT CHART | CARBURETOR USAGE CHART
• MODEL 4MV CARBURETOR
  
• GENERAL DESCRIPTION | THEORY OF OPERATION | FLOAT SYSTEM | IDLE SYSTEM | OFF IDLE OPERATION | HOT IDLE COMPENSATOR | MAIN METERING SYSTEM | POWER SYSTEM | AIR VALVE DASHPOT | ACCELERATING PUMP SYSTEM | CHOKE SYSTEM | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | AIR HORN REMOVAL | AIR HORN DISASSEMBLY | FLOAT BOWL DISASSEMBLY | THROTTLE BODY DISASSEMBLY | CLEANING AND INSPECTION | CARBURETOR ASSEMBLY | THROTTLE BODY | FLOAT BOWL | AIR HORN | AIR HORN TO BOWL INSTALLATION | ADJUSTMENT CHART

File Format: PDF 
Compatible: All Versions of Windows & Mac 
Language: English 
Requirements: Adobe PDF Reader 

Images used are for promotional purposes only.

Copyright©Car Manuals Direct

Adobe Reader is required to read this file. You can download it free from http://get.adobe.com/reader/