OLDSMOBILE 330 CID V8 Engine Rebuild Manual

Comes as a PDF download.

Complete shop manual with easy, step by step instructions for the DIY mechanic or professional technician to help maintain or rebuild the 330 CID V8 Engine.

Below is a detailed list of topics covered in this Oldsmobile Engine Rebuild  Manual: 

• DESCRIPTION
• ENGINE ASSEMBLY
  
• ENGINE MOUNTING | INTAKE MANIFOLD | EXHAUST MANIFOLD | MANIFOLD HEAT CONTROL VALVE | VALVE COVER | ROCKER ARMS | VALVE LIFTERS | ASSEMBLY AND VALVE LIFTER | LEAK-DOWN TEST | VALVE LIFTER DIAGNOSIS | CYLINDER HEAD AND GASKET | VALVES AND SPRINGS(HEAD REMOVED) | MEASURING VALVE STEM HEIGHT | VALVE GUIDES | REAMING ROCEDURE | REPLACING VALVE SPRING | OIL PAN (330 & 425 CU. IN.) | OIL PAN (400 CU. IN. ) | OIL PUMP | CONNECTING ROD AND PISTON ASSEMBLY | ROD BEARINGS | ROD ASSEMBLY | PISTON | MEASURING PISTON | CHECKING CYLINDER BORE | CLEANING PISTON | RINGS | RING TOLERANCE | PISTON RING AND RAIL GAP | SIDE CLEARANCE | RING IDENTIFICATION AND INSTALLATION | ROD AND PISTON ASSEMBLY | PISTON PINS | CRANKSHAFT PULLEY | HARMONIC BALANCER | FRONT COVER | OIL SEAL | TIMING CHAIN AND GEARS | CHECKING VALVE TIMING WITHOUT REMOVING FRONT COVER | CAMSHAFT | CAMSHAFT BEARINGS | CAMSHAFT AND OIL GALLEY PLUGS | CRANK SHAFT | MAIN BEARINGS | REAR MAIN OIL SEAL | PILOT BEARING | FLYWHEEL | FUEL PUMPS | TOOLS | SPECIFICATIONS
• ENGINE TUNE UP
  
• ENGINE TUNE-UP | SPARK PLUGS | DISTRIBUTOR CONTACT POINTS | DWELL ANGLE | IGNITION TIMING | SLOW IDLE ADJUSTMENT | ON-CAR ADJUSTMENTS - L-6 | CYLINDER HEAD TORQUE AND VALVE ADJUSTMENT | COMPRESSION TEST | ON-CAR ADJUSTMENTS - V-8 | IGNITION SYSTEM DIAGNOSIS | TUNE-UP CHART | DISTRIBUTOR TEST SPECS
• COOLING
  
• ENGINE COOLING SYSTEM | COOLING SYSTEM - V-8 | FAN | WATER PUMP | THERMOSTAT | THERMOSTATIC VACUUM SWlTCH-K-19 | FAN BLADE IDENTIFICATION CHART
• CARBURETION
  
• MODEL BV
• DESCRIPTION | CHOKE | AIR HORN | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | CARBURETOR ASSEMBLY | FLOAT BOWL | THROTTLE BODY | FLOAT BOWL | AIR HORN | FLOAT LEVEL ADJUSTMENT | FLOAT DROP ADJUSTMENT | CHOKE | ADJUSTMENTS (ON OR OFF CAR) | ADJUSTMENT SPECIFICATIONS
• MODEL YF CARBURETOR
  
• DESCRIPTION | BOWL AND THROTTLE BODY | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | CARBURETOR ASSEMBLY | METERING ROD | AIR HORN | FLOAT ADJUSTMENT | ASSEMBLE AIR HORN TO BOWL | ADJUSTMENTS
• MODEL 2GC CARBURETOR
  
• THEORY OF OPERATION | FLOAT SYSTEM | IDLE SYSTEM | PART THROTTLE SYSTEM | POWER SYSTEM | PUMP SYSTEM | CHOKE SYSTEM | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | CARBURETOR ASSEMBLY | ADJUSTMENT CHART | CARBURETOR USAGE CHART
• MODEL 4MV CARBURETOR
  
• GENERAL DESCRIPTION | THEORY OF OPERATION | FLOAT SYSTEM | IDLE SYSTEM | OFF IDLE OPERATION | HOT IDLE COMPENSATOR | MAIN METERING SYSTEM | POWER SYSTEM | AIR VALVE DASHPOT | ACCELERATING PUMP SYSTEM | CHOKE SYSTEM | CARBURETOR REMOVE AND INSTALL | CARBURETOR DISASSEMBLY | AIR HORN REMOVAL | AIR HORN DISASSEMBLY | FLOAT BOWL DISASSEMBLY | THROTTLE BODY DISASSEMBLY | CLEANING AND INSPECTION | CARBURETOR ASSEMBLY | THROTTLE BODY | FLOAT BOWL | AIR HORN | AIR HORN TO BOWL INSTALLATION | ADJUSTMENT CHART
• TRI-CARB ADJUSTMENTS
  
• ADJUSTMENTS FLOAT LEVEL ADJUSTMENT | FLOAT DROP ADJUSTMENT | PUMP ROD ADJUSTMENT | IDLE VENT VALVE ADJUSTMENT | VACUUM BREAK ADJUSTMENT | CHOKE VALVE ADJUSTMENT | THERMOSTATIC COIL ROD ADJUSTMENT | UNLOADER ADJUSTMENT | THROTTLE-ACTUATING ROD ADJUSTMENT | SLOW IDLE ADJUSTMENT | CARBURETOR ROD ADJUSTMENT

File Format: PDF 
Compatible: All Versions of Windows & Mac 
Language: English 
Requirements: Adobe PDF Reader 

Images used are for promotional purposes only.

Copyright©Car Manuals Direct

Adobe Reader is required to read this file. You can download it free from http://get.adobe.com/reader/